| No. | Brand | N | d | A | E | a | f | w | J |
| RKS.162.16.1644 | SKF | - | - | - | - | - | - | - | - |
| A12-22E2 | Rotek | - | 45 mm | - | - | - | - | - | - |
| RKS.061.20.1094 | SKF | - | 60 mm | - | - | - | - | - | - |
| M4-30P4 | Rotek | - | 900 mm | - | - | - | - | - | - |
| L6-22N9Z | Rotek | 60 mm | - | - | - | - | - | - | - |
| XSU140414 | INA | - | 40 mm | - | - | 20.3 mm | - | - | - |
| RKS.061.25.1314 | SKF | - | - | - | - | - | - | - | - |
| R8-30E3 | Rotek | - | - | - | - | - | - | - | - |
| VLI200744-N | INA | - | - | - | - | - | - | - | - |
| W13-24P1 | Rotek | - | 70 mm | - | - | 17.607 mm | - | - | - |
| RKS.061.25.1204 | SKF | - | 500 mm | - | - | - | - | - | - |
| RKS.23 0411 | SKF | - | 80 mm | - | - | - | - | - | - |
| RKS.162.14.1094 | SKF | - | 450 mm | - | - | - | - | - | - |
| XSA140544-N | INA | - | 3.9375 in | - | - | - | - | - | - |
| RKS.062.20.1094 | SKF | - | - | - | - | - | - | - | - |
| RKS. 111280101002 | SKF | - | - | - | - | - | - | - | - |
| RKS.161.14.0844 | SKF | - | 170 mm | - | - | - | - | - | - |
| RKS.061.25.1424 | SKF | - | - | - | - | - | - | - | - |
| XSU140844 | INA | - | 35 mm | - | - | - | - | - | - |
| VLA200744-N | INA | - | 400 mm | - | - | - | - | - | - |
| RKS.160.16.1314 | SKF | - | 95.25 mm | - | - | 32.002 mm | - | - | - |
| RKS.162.14.0544 | SKF | - | 50 mm | - | - | - | - | - | - |
| A12-18E5 | Rotek | - | - | - | - | - | - | - | - |
| RKS.060.25.1534 | SKF | - | - | - | - | - | - | - | - |
| A14-25P1 Rotek Slewing Ring Bearings | Threads per inch:18; B1:60.554 mm; d1:44.45 mm; Hydraulic nut:HMVC 10E; B4:14.173 mm; Mass adapter sleeve assembly:0.39 kg; G:49.962 mm; Sleeve:S 110x1.3/4; B:12.954 mm; d:55 mm; d3 max.:68.402 mm; |
| RKS.062.20.1094 SKF Slewing Ring Bearings | A2:187.325 mm; J max.:368.3 mm; J1:69.85 mm; Bearing limiting speed:3400 r/min; Cap bolt, SAE grade:8; PG:1/4 NPT; Appropriate attachment bolt size G:0.75 in; Housing:SAF 028 KA; H2:53.975 mm; R1:79.375 mm; RG:1/2 NPT; P180°:81.4 kN; Cap bolt recommended tightening torque:1220 N·m; A1:120.65 mm; Stabilizing ring:2 x 36053-50; P60°:185 kN; R2:30.163 mm; Mass pillow block:62.6 kg; End plug (suffix Y):EPR 27; |
| A8-22P11 Rotek Slewing Ring Bearings | H:30.1 mm; Reference speed:2600 r/min; da min.:69 mm; s:25 mm; Mass bearing (including seat washer where applicable):0.83 kg; C:10 mm; H1:33 mm; Basic static load rating C0:153 kN; ra max.:1 mm; Fatigue load limit Pu:5.6 kN; D1 ≈:47 mm; Minimum load factor A:0.12; D3:90 mm; D:85 mm; Limiting speed:3800 r/min; r1,2 min.:1 mm; Da max.:65 mm; D2:65 mm; Basic dynamic load rating C:76.1 kN; d:45 mm; |
| VSU200644 INA Slewing Ring Bearings | Da max.:110.5 mm; a:25.606 mm; Mass bearing:1.33 kg; Basic dynamic load rating C:163 kN; Reference speed:4500 r/min; Ca min.:4 mm; C:24.237 mm; Basic static load rating C0:186 kN; db min.:83.5 mm; B:29.007 mm; r1,2 min.:3.5 mm; r3,4 min.:2 mm; T:29.795 mm; Calculation factor e:0.37; Dimension series:475; Db min.:112 mm; D:120 mm; da max.:80 mm; rb max.:2 mm; ra max.:3.5 mm; |
| RKS.161.16.1204 SKF Slewing Ring Bearings | Da max.:498 mm; D:520 mm; D1 ≈:457 mm; Calculation factor Y2:1.07; Calculation factor e:0.95; r1,2 min.:5 mm; r0:2.5 mm; d1 ≈:403 mm; da min.:362 mm; Mass bearing:67.5 kg; Basic dynamic load rating C:780 kN; Basic static load rating C0:1700 kN; h:15 mm; Calculation factor A:8.12; a:301 mm; Calculation factor Y0:0.58; b:12.5 mm; ra max.:4 mm; B:82 mm; Calculation factor X:0.6; |
| XSU140944 INA Slewing Ring Bearings | Specific static load factor K0:500 N/mm²; D:47 mm; b1:3.1 mm; Basic dynamic load rating C:62 kN; d:30 mm; B:22 mm; Sealing solution:Triple-lip seals; Da max.:44 mm; Da min.:41.3 mm; da min.:33.3 mm; da max.:34.2 mm; Basic static load rating C0:310 kN; Specific dynamic load factor K:100 N/mm²; C:18 mm; α:6 °; b:3.1 mm; dk:40.7 mm; Mass plain bearing:0.16 kg; rb max.:0.6 mm; Lubricant:Regular relubricatio; |
| A12-18E5 Rotek Slewing Ring Bearings | Grease Type:Unirex N2; Bearing Locking Device:Tapered Adapter Slee; Retainer Material:Nylon; Housing Coating:Powder Coat; Shaft Attachment (2):Grip Tight; Ship Weight:1.8 LB; Bearing Family:Grip Tight Ball Bear; Bearing Outer Ring Material:Steel; Flinger Type:Standard; Anti-Rotation Pin:Yes; Base to Center Height:Standard; UPC:782476351618; Housing Type:2 Bolt Pillow Block; Expansion Type:Non-Expansion; |
| RKS.162.14.0744 SKF Slewing Ring Bearings | Flinger Type:Standard; Flinger Material:Steel; Base to Center Height:Not Applicable; Retainer Type:Std Retainer; Grease Type:Unirex N2; Self Aligning:Self Centering; Bearing Bore Shape:Round; Anti-Rotation Pin:Yes; Bearing Locking Device:Setscrew; Seal Type:Single Lip; Bearing Series:214 Series; Bearing Family:Setscrew Ball Bearin; Bearing Duty:Medium Duty; Manufacturing Plant Location:Rogersville, TN; |
| H7-30E1 Rotek Slewing Ring Bearings | Coefficient of friction µ max.:0.15; D:14 mm; Tolerance shaft:e7; B:10 mm; Tolerance housing:H7; Specific dynamic load factor K:25 N/mm²; B1:3 mm; Mass bushing:0.008 kg; D1:18 mm; Coefficient of friction µ min.:0.08; Specific static load factor K0:45 N/mm²; Permissible sliding velocity v max.:0.5 m/s; Permissible sliding velocity v min.:0 m/s; d:9 mm; |
| RKS.060.25.1424 SKF Slewing Ring Bearings | da max.:63.1 mm; dk:82.169 mm; r1 min.:1.5 mm; Sealing solution:-; B:52.578 mm; Basic dynamic load rating C:280 kN; Specific static load factor K0:300 N/mm²; d:50.8 mm; Material constant KM:330; Basic static load rating C0:850 kN; Da max.:85.3 mm; D:90.488 mm; Lubricant:Regular relubricatio; da min.:57.5 mm; b:5.7 mm; r2 min.:1 mm; C:42.85 mm; M:4 mm; b1:5 mm; rb max.:1 mm; |
| RKS.062.25.1424 SKF Slewing Ring Bearings | Housing Material:Cast Iron; Grease Type:Mobilith SHC PM 220; Ring Size:Next Larger Ring Siz; Flinger Type:Rubberized; Bearing Locking Device:Eccentric Collar; Housing Coating:Powder Coat; Ball Material:Steel; Bearing Duty:Normal Duty; Anti-Rotation Pin:Yes; Housing Type:4 Bolt Flange; Retainer Material:Polymer; d:2.0000 in; Shaft Attachment (2):Eccentric Collar; Expansion Type:Non-Expansion; Max Bearing Speed:3250 rpm; |
| A13-22P4 Rotek Slewing Ring Bearings | P90°:249 kN; H:400.05 mm; P120°:151 kN; R1:120.65 mm; Cap bolt recommended tightening torque:1735.4 N·m; P180°:160 kN; Da:339.999 mm; Max. speed for Taconite seal:385 r/min; h:57.15 mm; Ca:101.803 mm; Cap bolt, SAE grade:8; P60°:416 kN; ba:80.169 mm; A2:339.725 mm; P150°:136 kN; R2:42.069 mm; PG:1/4 NPT; Pa:59.6 kN; A1:190.5 mm; RG:1 NPT; |
RKS.161.14.0844 SKF Slewing Ring Bearings Video
SKF Slewing Ring Bearing RKS series Manufacturers and
We have many quality SKF Slewing Ring Bearing RKS series of different styles in stock. Please ... RKS.161.14.0744, RKS.161.14.0844, RKS.161.14.0944, RKS
Slewing Ring Bearing RKS.161.14.0844 Suppliers and
High in quality and precision, reliable in stability, and long in lifespan, this slewing ring bearing rks.161.14.0844 of Sun Rises has already been sold to the
China SKF Slewing Ring Bearing Rks. 062.20.0844 - China
China SKF Slewing Ring Bearing Rks. 062.20.0844, Find details about China Slew Bearings, Slewing Bearings from SKF Slewing Ring ... 161.14.0844, RKS
China Cross Roller Slewing Ring with External Gears (RKS
161.14.0844), Find details about China Slewing Bearing, Slewing Ring from Cross Roller Slewing Ring with External Gears (RKS. 161.14.0844) - Luoyang
RKS.161.14.0844 Drawing of RKS slewing bearing Luoyang
RKS.161.14.0844 Drawing of RKS slewing bearing Luoyang JCB Bearing Technology Company
RKS.161.14.0844 Slewing bearing | Welcome to TBB website
RKS.161.14.0844 Slewing bearing ,TBB supplies bearings for multiple applications. Different types bearing such as ball bearings, roller bearings, ceramic